Contact us
KIT PLAK-PLÂTRE
Water heating systems fixing
On substrates with a plasterboard and insulation lining
Description
- Mounting water heating systems in hollow materials with a plasterboard and insulation lining.
- Complete kit: 4 wall plugs, 2 lag screws, 2 double-threaded screws, 2 M12 threaded washers, 2 washers Ø12, 2 M12 nuts.
- Wall plug Ø16.
- Lag screw Ø12.
- Double-threaded screw Ø12 with 6-mm hex drive.
- Advice for use: tilt the fixing for greater resistance.
- For water heating systems with a maximum capacity of 250 litres.
- Drill hole Ø16.
Product advantages
- Made in France.
- Opens up into several holes in the substrate.
- Wall plug 100% nylon polyamide 6.
- Anti-rotation fins.
- High mounting: welded washer: the washer does not go behind the foot of the water heating system.
- Low mounting: hex drive facilitates screwing. The threaded washer stops the plasterboard from being crushed.
Parpaing
Brique creuse
Parpaing
Brique creuse
Product variants
|
Designation 3 variants |
Condt | Longueur | Surcondt | Reference |
|---|---|---|---|---|
|
KIT PLAK-PLATRE D 16 X 200 Le sachet
|
1 kit | 200 mm | 5 kits |
A150060
|
|
KIT PLAK-PLATRE D 16 X 240 Le sachet
|
1 kit | 240 mm | 5 kits |
A150080
|
|
KIT PLAK-PLATRE D 16 X 300 Le sachet
|
1 kit | 300 mm | 5 kits |
A150085
|
Technical informations - Implementation data
| Ø Plug | Plug length | Drilling depth | Drilling | Insulation max. |
|---|---|---|---|---|
| Ø16 + screw Ø12 | 200 mm | 210 mm | Ø16 | 70 mm |
| 240 mm | 250 mm | Ø16 | 110 mm | |
| 300 mm | 310 mm | Ø16 | 170 mm | |
Technical documentation
Water heating systems fixing - kit-plak-platre-fiche-produit
